Curtains. Saturday , March 18th , 2017 - 06:00:26 AM
A great idea for DIY bay window curtain rods is to make them with the help of dowels. To make these functional bay window curtain rods, you will need a long dowel, decorative drawer knobs, a hand-held drill, a handsaw, T nut bolts and spray paint. First measure the width of all the three window casements of the bay window. Now cut the dowel into three pieces, according to the dimension of the window. If your bay window is not the three window casement style, but consists of one wide window, then you need not cut the dowel at all. Drill holes at the ends of the dowel by attaching a drill bit to a hand-held drill. While drilling holes into the dowel, make sure that it is properly centered. Attach T nut bolts on each holes of the dowels and make sure it is flush with the dowel ends. Screw in the decorative drawer knobs on each end of the dowels. If you want to give the curtain rod a more finished look, then spray paint it with a matt or metallic textured paint. Install curtain rods on the brackets of the bay windows.
You would then need to position the brackets on the wall, and mark around the outside edge using a pencil. The next step is hammering a nail into the wall where the screws are supposed to be put. The curtain shower curtain rod set would have screws if mounting on a stud, or drywall anchors if mounting solely on a drywall.
Before you start with the repair, you must clean them up thoroughly. It will not only help to carry out the repair job properly, but also prevent any further damage to them. Whenever you have to purchase a new component, take proper measurements so that it sets well with its existing components.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Club Penguin claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.